Force reset on TSOP - ECM IRD BEV
Your IRD has been ECMed. This is often refered to as "Location ID 00000001" - a hint of an ECMed receiver that shows on your TV when you hit the "Sys Info" button on your remote. To cure this ECM, you'll have to restore your Tsop and reprogram your platform with the latest fix if available. See the top of this thread or the Files section for the latest fixes for each platform.
First, here's how to refresh your TSOP:
(Set your IRD to "Download without permission")
1- Hook jTag and open jKeys.
2- Hit "Flash Programming" button.
3- In the drop down menu, right upper hand corner, change "FULL" to an SA address specific to your IRD:
.......... 3100 = SA3 in flash 1
.......... 2700/2800/3700 = SA5
.......... 3800/3900/4700/4900 = SA30
.......... 5100/5800 = SA54 in flash 2
.......... 6000 = SA30 in flash 1
4- Click on Erase (erase 3 times to be sure).
6- Plug ird in the stream and let it update (Don't touch it until it's finished! Usually takes 5 to 15 minutes).
7- Might have to do the "Check switch": Menu>6>1>1>Check Switch>Check.
8- Watch tv.
If you have problems using your jTag cable or don't have one, try the Junk Yard Fix - This is considered a last resort fix.